INA GE60-FO-2RS plain bearings

Duty cycle tolerance ±:10 %; Phase shift output signal:90 °; Limiting speed:5000 r/min; Phase shift output signal tolerance ±:30 °; Mass sensor unit:0.07 kg; Number of pulses per revolution N:32; Cable connector type:Free cable end; Duty cycle:50 %; Period accuracy ±:4 %

Fillet Radius ra:2.00 mm; Keyway e:58.4 mm; Preload:30 lb; Keyway f:4.7 mm; X-L-O Part Number:115-77; Grease Speed Rating Max. n1:6000 rpm; B:57.15 mm; Oil Speed Rating Max. n2:8000 rpm; d:57.150 mm; Oil Mist Speed Rating Max. n3:15000 rpm;

Dynamic Load Rating (kN):1460; Fatigue Load Rating (kN):132; Clearance:Standard; Static Load Rating (kN):1630; Limiting Speed Rating (r/min):2200; Cage Type:Brass; B:102mm; d:140mm; Seals or Shields:Open Type; Availability:In Stock;

Cage Type:Brass; d:60mm; Dynamic Load Rating (kN):52; Availability:In Stock; Fatigue Load Rating (kN):2.24; Clearance:Standard; Limiting Speed Rating (r/min):14000; Static Load Rating (kN):36; Reference Speed Rating (r/min):6800; D:110mm;

Dimension L:3.8125 in; Dimension H:1.0625 in; Dimension N:0.6563 in; Dimension J:1.4375 in; Basic Static Radial Load Rating Co:1750 lbf; Weight W:0.87 lb; Width A:1.3750 in; Shaft Diameter D:1 in; Dimension S1:0.7813 in; Insert Bearing IB:ZMaRC;

Seals or Shields:Open Type; Preload:Light; D:120mm; Static Load Rating (kN):52; Availability:In Stock; Cage Type:Plastic; Clearance:Standard; SKU:7213acyu/glp4-nachi; B:23mm; Weight:1.02 KGS;

D:120mm; Availability:In Stock; Clearance:C3; Weight:0.02 KGS; Cage Type:Steel; Seals or Shields:Open Type; d:65mm; Dynamic Load Rating (kN):193; Limiting Speed Rating (r/min):7000; Fatigue Load Rating (kN):24;

B:24mm; Availability:In Stock; Dynamic Load Rating (kN):66.3; Seals or Shields:Open Type; Cage Type:Plastic; Oil Limiting Speed (r/min):16000; Grease Limiting Speed (r/min):9500; D:125mm; d:70mm; Preload:Medium;

ra max.:1 mm; Da max.:56 mm; Basic dynamic load rating C:89.7 kN; D:62 mm; r3,4 min.:1 mm; Limiting speed:10000 r/min; b:5 mm; Calculation factor Y2:2.2; Da min.:54 mm; d:35 mm;

Tolerance housing:H7 m/s; Tolerance shaft:f7 m/s; D:23 mm; Permissible sliding velocity v max.:1 m/s; B:30 mm; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:40 N/mm²; Specific static load factor K0:120 N/mm²; Mass bushing:0.027 kg; Coefficient of friction &micro

Clearance:Standard; Cage Type:Steel; d:160mm; Availability:In Stock; Seals or Shields:Open Type; D:290mm; SKU:22232-e1-k-qbl; B:80mm; Weight:0.02 KGS;

Max. speed for contact seal:2600 r/min; P180°:19.1 kN; H2:25.4 mm; P120°:17.8 kN; Appropriate attachment bolt size G:0.625 in; Cap bolt recommended tightening torque:81.3 N·m; P150°:16 kN; H1:76.2 mm; h:27.781 mm; R1:44.45 mm;

P120°:149 kN; Taconite seal (dc shaft position):TER 134; A1:158.75 mm; H2:63.5 mm; Ca:82.804 mm; Taconite seal (db shaft position):TER 151; Bearing:22230 CC/W33; Lock nut:AN 30; Housing:SSAFS 230; H1:160.35 mm;

Weight:0.20 KGS; Clearance:Standard; Availability:In Stock; SKU:f696-2rs-zen; D:15mm; B:5mm; d:6mm; Cage Type:Steel; Seals or Shields:Two Rubber Seals;

J1:60.325 mm; PG:1/4 NPT; J max.:333.375 mm; Appropriate attachment bolt size G:0.75 in; End plug (suffix Y):EPR 14; H:217.488 mm; P60°:119 kN; P180°:48.9 kN; H2:44.45 mm; Taconite seal:TER 657;