NACHI UCP218 bearing units

Designation of open end cover:SCOU211-32; Dz:110 mm; d:50.8 mm; Recommended tightening torque for set screw:8 Nm; C0:29.2 kN; H2:126 mm; Designation of housing:P211N-; A:60 mm; S:11.8 mm; C:43.55 kN;

da max:77 mm; Y0:0.6; Da min:109 mm; Db min:132.3 mm; Fatigue limit load, Cu:45.5 kN; e:0.55; C:39 mm; r1a max:2 mm; Nlim:5,100 rpm; Min operating temperature, Tmin:-40 °C;

C:81.6 kN; J:250 mm; A:85 mm; N:25mm; G:M6x1; Weight:9.5 kg; L1:95 mm; s1:35.5 mm; Designation of housing:P312-; H:85 mm;

Characteristic inner ring frequency, BPFI:9.23 Hz; B:21 mm; Characteristic cage frequency, FTF:0.42 Hz; F:66 mm; da min:63 mm; Max operating temperature, Tmax:120 °C; Mass (without HJ ring):0.66 kg; Product Group:B04144; Fatigue limit load, Cu:11.3 kN; Minimum Buy Quantity:N/A;

Bearing Inner Ring Material:Steel; Shaft Attachment (2):D-Lock; Manufacturing Plant Location:Rogersville, TN; Ball Grade:Class 10; End Cap Groove:No; Flinger Type:Rubberized; Bearing Family:D-Lock Ball Bearing; Retainer Material:Nylon; Flinger Material:Steel; Ship Weight:1.4 LB;

B:36.5 mm; T max.:200 °C; H:50 mm; H2:95 mm; C0:15.2 kN; G:M6x1; Weight:2.08 kg; Designation of bearing:EX306G2T20; L:180 mm; N1:20 mm;

Designation of housing:SP203-205/47N-; A:21 mm; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; H:78 mm; L:264 mm; T min.:-20 °C; G:R1/8"; Designation of bearing:UC204G2T20; Z:17 mm;

C0:6.65 kN; L1:58 mm; s1:15.5 mm; Designation of housing:EHE204-; Weight:0.6 kg; L3:38 mm; E:21 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; G:R1/8";

T max.:100 °C; Designation of housing:FLZ209-; H:180 mm; L:111 mm; C:31.85 kN; d:45 mm; s1:20.6 mm; J:148.5 mm; Weight:1.85 kg; H3:105;

Characteristic inner ring frequency, BPFI:7.75 Hz; r1a max:0.6 mm; Min operating temperature, Tmin:-20 °C; Mass (without HJ ring):0.16 kg; Characteristic rolling element frequency, BSF:5.01 Hz; Nlim:17,000 rpm; rs min:1 mm; d:25 mm; Static load, C0:36 kN; r1s min:0.6 mm;

H:105 mm; L:190 mm; C0:20.8 kN; G:M6x1; Recommended tightening torque for set screw:11.5 Nm; S:19 mm; A1:36 mm; Designation of housing:PH209N-; N1:25 mm; L1:62 mm;

Designation of bearing:UC209-27G2L3; T max.:100 °C; Weight:1.94 kg; G:M6x1; S:19 mm; J:148 mm; A:38 mm; T min.:-20 °C; L:108 mm; Designation of housing:FL209-;

d:25 mm; C0:7.88 kN; Designation of housing:FC205-; J:90 mm; A:27 mm; Weight:1.01 kg; s1:17 mm; e:10 mm; N:12mm; A2:29.7 mm;

T max.:100 °C; C:12.8 kN; S:12.7 mm; B:31 mm; H2:64 mm; H:33.3 mm; C0:6.65 kN; L1:18 mm; Recommended tightening torque for set screw:5.5 Nm; H1:9 mm;

A:38 mm; T max.:200 °C; C:19.5 kN; Designation of housing:PAE206-; H:42.9 mm; d:30 mm; C0:11.2 kN; Recommended tightening torque for set screw:5.5 Nm; s1:19.05 mm; Weight:0.92 kg;